The UK's Leading Supplier of Roofing Tools, Machinery, Metals, Fabrications & Products
Traditional metal roofing supplier, Copper guttering, Zinc roofing
Search Your Cart

Ductwork Tools


HVAC & ducting

(Code: Malco-TS1)
52.05
TurboShear
Fits to chuck of a standard or cordless drill (excluded).
Capacity: 1.02mm galv
Weight: 0.74kg
(Code: GD-SFS-LT)
24.97
SFS Intec Lazy TongsScissor action pop rivet tool.
(Code: Malco-TSHD)
96.01
TurboShear HD
Fits to chuck of a standard or cordless drill (excluded).
Heavy duty shear that clamps to the drill body for one-handed operation.
Capacity: 1.32mm galv
Weight: 1.18kg

(Code: Malco-TSMD)
108.78
TurboShear MD Double Cut
Fits to chuck of a standard or cordless drill (excluded).
Heavy duty double cutting shear that clamps to the drill body for one-handed operation.
Capacity: 1.32mm galv
Weight: 1.18kg

(Code: Malco-TSA2)
251.75
TurboShear A2
Fits to chuck of a standard 7 amp or 14.4v cordless drill (excluded).
Heavy duty power shear that clamps to the drill body for one-handed operation.
Capacity: 1.52mm steel
Weight: 1.36kg
(Code: Malco-TSHD1A)
234.97
TurboShear HD1A
Air powered heavy duty shear.
Capacity: 1.32mm galv
Weight: 1.67kg
(Code: Malco-C5A)
201.81
Power Assisted Crimpers
Make fast, easy, precise crimps in large or small round duct and pipe.
Fits to chuck of a minimum 14.4v cordless drill (excluded).
Heavy duty shear that clamps to the drill body for one-handed operation.
Weight: 1.6kg
(Code: Malco-C5AC)
131.19
TurboCrimper IMPACT
The Malco TurboCrimper IMPACT is a simple, compact accessory that works exclusively with the power assistance of impact driver technology to safely and efficiently crimp 30 to 24 gauge (0.41 to 0.71 mm) galvanized round duct and (0.31 to 0.61 mm) black stove pipe.

Just connect the 1/4 inch power groove drive shaft to your cordless or corded (Min.12 Volt DC / Max. 7 Amp AC) impact driver.
(Code: Malco-MCCB7)
68.27
Sheet Metal Saw Blade
Cutting disc for standing seam roofing sheets.
Diameter: 184mm
Bore: 16mm
RPM: 5800
Teeth: 56
Capacity: 1.52mm steel
Weight: 0.5kg
(Code: Malco-M2001)
24.42
Max Aviation Snips
For straight and curved cuts.
Compound action.
Serrated lower jaw.
Thermoplastic handles.
Left cut pattern.
Length: 254mm
Blade: 35mm
Capacity: 1.3mm galv
Weight: 0.4kg
(Code: Malco-AV8)
21.57
Vertical Aviation Snips
For tight circular or square pattern cuts.
Compound action.
Serrated upper jaw.
Thermoplastic handles.
Left cut pattern.
Length: 222mm
Blade: 35mm
Capacity: 0.61mm steel
Weight: 0.454kg
(Code: Malco-M2006)
29.68
Max Offset Snips
For straight and tight curved cuts.
Compound action.
Serrated upper jaw.
Thermoplastic handles.
Left cut pattern.
Length: 254mm
Blade: 32mm
Capacity: 1.3mm galv
Weight: 0.46kg
(Code: Malco-M2004)
46.24
Max Double Cut Snips
For straight double cuts.
Compound action.
Thermoplastic handles.
Length: 254mm
Blade: 35mm
Capacity: 0.86mm galv
Weight: 0.46kg
(Code: Malco-M2005)
25.64
Max Bulldog Snips
For notching and trimming to the blade tip.
Compound action.
Serrated lower jaw.
Thermoplastic handles.
Length: 254mm
Blade: 27mm
Capacity: 1.3mm galv
Weight: 0.38kg
(Code: Malco-N2R)
50.35
Redline 'V' Notcher
Produces a 'V' notch.
Blade: 25mm
Notch angle: 30deg
Capacity: 0.7mm galv
Weight: 0.49kg
(Code: Malco-HP18KR)
87.53
Redline Hole Punch
Punches 3.3mm & 4.9mm holes.
Adjustable stop from 6mm to 29mm.
Length: 240mm
Blade: 25mm
Capacity: 0.7mm galv
Weight: 0.54kg
(Code: Malco-SL1R)
52.31
Redline Snaplock Punch SL1R
Length: 203mm
Throat Depth: 9.5mm
Weight: 0.46kg
(Code: Malco-FDC2)
40.76
Flexible Duct Shear
Length: 311mm
Blade Length: 111mm
Weight: 0.37kg
(Code: Malco-24)
16.24
Divider
Length: 340mm
Maximum circle diameter: 1070mm
Weight: 0.26kg
(Code: Malco-TY4G)
36.06
Tensioning Tie Tool
Length: 152mm
Weight: 0.31kg
(Code: Malco-HC1)
64.42
Adjustable Hole Cutter
Hole Diameter: 51mm-305mm
Weight: 0.46kg
(Code: Malco-CB)
10.89
Replacement Cutter Bit
High speed steel
For Malco adjustable hole cutter HC1 & HC2
(Code: Malco-DS1)
30.65
Duct Stretcher
Length: 406mm
Weight: 0.34kg