The UK's Leading Supplier of Roofing Tools, Machinery, Metals, Fabrications & Products
Order by Ref

TurboCrimper IMPACT

(Code: Malco-C5A2)
Quickly makes your impact driver a power crimper!
£ 155.54
£ 124.43
  1. The Malco TurboCrimper Impact is a simple, compact accessory that works exclusively with the power assistance of impact driver technology to safely and efficiently crimp 0.4mm1 to 0.71mm galvanised round duct and 0.31mm to 0.61mm black stove pipe. The TurboCrimper Impact does not require set-up or adjustment. Just connect the 1/4 inch power groove drive shaft to your cordless or corded (Min. 12 Volt DC / Max. 7 Amp AC) impact driver to immediately begin crimping multiple sizes, types and thickness of pipe and duct (including spiral duct), fast and easy.

    The TurboCrimper Impact is 78% faster than a manual sheet metal crimping tool based on actual field trials! It is comfortable for any operator to maneuver and, lefties take note, it works with the impact driver in forward or reverse. The handy little TurboCrimper Impact is a must-have accessory for every HVAC installer and easily stores in a ready tool pouch or bag when not in use.

    How it's done
    With the pipe or duct seam in closed position, start the crimp to one side of the seam by gently tugging on the driver trigger and angling the TurboCrimper Impact onto the metal edge. Walk the crimper around the pipe circumference in a controlled manner and then angle the crimper off the metal as the crimper approaches the other side of the seam.

    • The TurboCrimper Impact is 5 times faster than a manual sheet metal crimper.
    • Saves time and labor on your next job.
    • No setup or adjustment is needed, just chuck up and go.
    • Easily stored in a bag or pouch when not in use.

    Note: Use Impact Driver Only.
    • Galvanised steel capacity: 0.41mm - 0.71mm
    • Cold rolled steel capacity: 0.31mm - 0.61mm
    • Impact Driver Requirements: Min 12V DC, Max 7A AC
    • Chuck Requirements: 1/4 Hex, Quick Release
    • Weight: 0.85kg