(Code: Malco-TS1) | | 
Fits to chuck of a standard or cordless drill (excluded).
Capacity: 1.02mm galv
Weight: 0.74kg | |
| (Code: Malco-TSHD) | | 
Fits to chuck of a standard or cordless drill (excluded).
Heavy duty shear that clamps to the drill body for one-handed operation.
Capacity: 1.32mm galv
Weight: 1.18kg
| |
|
(Code: Malco-TSHDRB) | | 
Replacement blade set. | |
| (Code: Malco-TSMD) | | 
Fits to chuck of a standard or cordless drill (excluded).
Heavy duty double cutting shear that clamps to the drill body for one-handed operation.
Capacity: 1.32mm galv
Weight: 1.18kg
| |
|
(Code: Malco-TSMDRB) | | 
Replacement blade set. | |
| (Code: Malco-TSCM) | | 
For corrugated metal.
Fits to chuck of a standard or cordless drill (excluded).
Heavy duty shear that clamps to the drill body for one-handed operation.
Capacity: 0.61mm steel
Weight: 0.98kg | |
|
(Code: Malco-TSCMRB) | | 
Replacement blade set. | |
| (Code: Malco-TSA2) | | 
Fits to chuck of a standard 7 amp or 14.4v cordless drill (excluded).
Heavy duty power shear that clamps to the drill body for one-handed operation.
Capacity: 1.52mm steel
Weight: 1.36kg | |
|
(Code: Malco-TSHD1A) | | 
Air powered heavy duty shear.
Capacity: 1.32mm galv
Weight: 1.67kg | |
| (Code: Malco-TSNS1) | | 
Cuts natural roofing slate.
Fits to chuck of a standard or cordless drill (excluded).
Heavy duty shear that clamps to the drill body for one-handed operation.
Weight: 1.18kg
| |
|
(Code: Malco-TSNS1RB) | | 
Replacement blade and skid plate set. | |
| (Code: Malco-TSF1) | | 
Cuts Fibre Cement board up to 8mm thick.
Fits to chuck of a standard or cordless drill (excluded).
Heavy duty shear that clamps to the drill body for one-handed operation.
Weight: 1.31kg
| |
|
(Code: Malco-TSF2) | | 
Cuts Fibre Cement backer board up to 13mm thick.
Fits to chuck of a standard or cordless drill (excluded).
Heavy duty shear that clamps to the drill body for one-handed operation.
Weight: 1.31kg | |
| (Code: Malco-TSV1) | | 
Cuts Vinyl cladding up to 1.4mm thick.
Cuts Vinyl sheeting up to 3.18mm thick.
Fits to chuck of a standard or cordless drill (excluded).
Heavy duty shear that clamps to the drill body for one-handed operation.
Weight: 0.98kg | |
|
(Code: Malco-TSV1RB) | | 
Replacement blade set. | |
| (Code: Malco-C5AC) | | 
The Malco TurboCrimper IMPACT is a simple, compact accessory that works exclusively with the power assistance of impact driver technology to safely and efficiently crimp 30 to 24 gauge (0.41 to 0.71 mm) galvanized round duct and (0.31 to 0.61 mm) black stove pipe.
Just connect the 1/4 inch power groove drive shaft to your cordless or corded (Min.12 Volt DC / Max. 7 Amp AC) impact driver.
| |
|
(Code: Malco-C5A) | | 
Make fast, easy, precise crimps in large or small round duct and pipe.
Fits to chuck of a minimum 14.4v cordless drill (excluded).
Heavy duty shear that clamps to the drill body for one-handed operation.
Weight: 1.6kg | |
| (Code: Malco-MSHC) | | 
Reversible with 1/4" and 5/16" hex heads
| |
|
(Code: Malco-FCC7) | | 
Cut multiple angles in Fibre Cement board with Guillotine Precision and Minimal Dust.
Weight: 20.4kg | |
| (Code: Malco-FCCB7) | | 
For repetitive cuts in fiber cement with power mitres or portable circular saws, Malco now offers specialized Circular Saw Blades with PCD (PolyCrystalline Diamond) faced carbide tips for longer life.
Weight: 0.5kg | |
|
(Code: Malco-MCCB7) | | 
Cutting disc for standing seam roofing sheets.
Diameter: 184mm
Bore: 16mm
RPM: 5800
Teeth: 56
Capacity: 1.52mm steel
Weight: 0.5kg | |
| (Code: Malco-M14N) | | 
For straight and mild curved cuts.
Left cut pattern only.
Length: 360mm
Blade: 82mm
Capacity: 0.7mm galv
Weight: 0.57kg | |
|
(Code: Malco-MC14N) | | 
For straight and tight curved cuts.
Left cut pattern only.
Length: 360mm
Blade: 82mm
Capacity: 0.7mm galv
Weight: 0.57kg | |
| (Code: Malco-M2001) | | 
For straight and curved cuts.
Compound action.
Serrated lower jaw.
Thermoplastic handles.
Left cut pattern.
Length: 254mm
Blade: 35mm
Capacity: 1.3mm galv
Weight: 0.4kg | |
|
(Code: Malco-AV8) | | 
For tight circular or square pattern cuts.
Compound action.
Serrated upper jaw.
Thermoplastic handles.
Left cut pattern.
Length: 222mm
Blade: 35mm
Capacity: 0.61mm steel
Weight: 0.454kg | |
| (Code: Malco-M2006) | | 
For straight and tight curved cuts.
Compound action.
Serrated upper jaw.
Thermoplastic handles.
Left cut pattern.
Length: 254mm
Blade: 32mm
Capacity: 1.3mm galv
Weight: 0.46kg | |
|
(Code: Malco-M2004) | | 
For straight double cuts.
Compound action.
Thermoplastic handles.
Length: 254mm
Blade: 35mm
Capacity: 0.86mm galv
Weight: 0.46kg | |
| (Code: Malco-M2005) | | 
For notching and trimming to the blade tip.
Compound action.
Serrated lower jaw.
Thermoplastic handles.
Length: 254mm
Blade: 27mm
Capacity: 1.3mm galv
Weight: 0.38kg | |
|
(Code: Malco-N2R) | | 
Produces a 'V' notch.
Blade: 25mm
Notch angle: 30deg
Capacity: 0.7mm galv
Weight: 0.49kg | |
| (Code: Malco-HP18KR) | | 
Punches 3.3mm & 4.9mm holes.
Adjustable stop from 6mm to 29mm.
Length: 240mm
Blade: 25mm
Capacity: 0.7mm galv
Weight: 0.54kg | |
|
(Code: Malco-SL1R) | | 
Length: 203mm
Throat Depth: 9.5mm
Weight: 0.46kg | |
| (Code: Malco-SL2R) | | 
Adjustable stop from 6.4mm to 15.9mm.
Length: 210mm
Weight: 0.46kg | |
|
(Code: Malco-S2R) | | 
Precise 'V' notched graduations (1/4"increments).
Drop-forged high impact steel jaws.
Hardened steel handles.
Rust resistant nickel painting.
Length: 220mm
Blade: 80mm
Capacity: 0.7mm galv
Weight: 0.64kg | |
| (Code: Malco-S3R) | | 
Precise 'V' notched graduations (1/4"increments).
Drop-forged high impact steel jaws.
Hardened steel handles.
Rust resistant nickel painting.
Length: 220mm
Blade: 80mm
Capacity: 0.7mm galv
Weight: 0.67kg | |
|
(Code: Malco-S6R) | | 
Precise 'V' notched graduations (1/4"increments).
Drop-forged high impact steel jaws.
Hardened steel handles.
Rust resistant nickel painting.
Length: 220mm
Blade: 150mm
Capacity: 0.7mm galv
Weight: 0.86kg | |
| (Code: Malco-S11) | | 
Cast steel with precision ground jaws.
Length: 241mm
Blade: 90mm
Weight: 1.31kg | |
|
(Code: Malco-SG11) | | 
Cast steel with vinyl-gripped jaws.
Length: 241mm
Blade: 90mm
Weight: 1.33kg | |
| (Code: Malco-SC3R) | | 
Length: 229mm
Throat Depth: 32mm
Weight: 0.4kg | |
|
(Code: Malco-C4R) | | 
Length: 229mm
Throat Depth: 32mm
Weight: 0.45kg | |
| (Code: Malco-C5R) | | 
Length: 244mm
Throat Depth: 41mm
Weight: 0.48kg | |
|
(Code: Malco-C6R) | | 
Length: 244mm
Throat Depth: 41mm
Weight: 0.45kg | |
| (Code: Malco-18F) | | 
Bending depth: 9.5mm/25.4mm
Folding width: 460mm
Weight: 0.88kg | |
|
(Code: Malco-24F) | | 
Bending depth: 9.5mm/25.4mm
Folding width: 610mm
Weight: 1.20kg | |
| (Code: Malco-ER3) | | 
Heavy duty edge roller with 3 stations.
Outer rollers can be retracted for curved rolling.
Bends up to 90deg.
Capacity: 0.8mm copper / zinc
Maximum bending height: 102mm
Weight: 3.86kg | |
|
(Code: Malco-FDC2) | | 
Length: 311mm
Blade Length: 111mm
Weight: 0.37kg | |
| (Code: Malco-24) | | 
Length: 340mm
Maximum circle diameter: 1070mm
Weight: 0.26kg | |
|
(Code: Malco-TY4G) | | 
Length: 152mm
Weight: 0.31kg | |
| (Code: Malco-HC1) | | 
Hole Diameter: 51mm-305mm
Weight: 0.46kg | |
|
(Code: Malco-CB) | | 
High speed steel
For Malco adjustable hole cutter HC1 & HC2 | |
| (Code: Malco-DS1) | | 
Length: 406mm
Weight: 0.34kg | |
|
(Code: Malco-NSP1) | | 
Hole punch for natural roofing slate.
Length: 216mm
Capacity: 4-8mm
Throat depth: 63mm
Hole size: 0.125mm
Weight: 0.66kg | |
| (Code: Malco-NSC1) | | 
Hand cutter for natural roofing slate.
Length: 222mm
Capacity: 4-8mm
Weight: 0.4kg | |
|
(Code: Malco-DEFT) | | 
Bending depth: 38mm
Folding width: 610mm
Weight: 1.66kg | |
| (Code: Malco-FCG2) | | 
Fibre Cement Thickness: 8mm
Length: 152mm
Weight: 0.11kg | |
|
(Code: Malco-FCFG) | | 
Length: 276mm
Weight: 0.06kg | |
| (Code: Malco-SL5) | | 
Length: 229mm
Throat depth: 9.5mm
Weight: 0.34kg | |
|
(Code: Malco-NHP1R) | | 
Length: 216mm
Throat depth: 15.9mm
Slot size: 19.1mm x 4mm
Weight: 0.46kg | |
| (Code: Malco-SRT2) | | 
Length: 159mm
Weight: 0.09kg | |
|
